Ankora Linux Ankora Linux Download
EN

Download and install

A USB stick and a few minutes are enough. If you already use Linux, you can switch with one command.

Open the Ankora Linux 3.0 releases Source code
Requirements

What you need

  • A 64-bit (amd64) processor
  • At least 2 GB of memory (4 GB is comfortable)
  • An empty USB stick for the ISO
  • An internet connection (for the download)
Install

Ready in three steps

  1. Download

    Get the ISO file and its verification file from the releases page.

  2. Write it to a USB stick

    Write the ISO to an empty USB stick with a free tool such as BalenaEtcher or Rufus.

  3. Boot and install

    Start the computer from the USB stick. The installer runs step by step and the system restarts at the end.

Command line

If you prefer the terminal

gh release download --repo Ankora-Linux/Ankora \
  --pattern '*.iso*'

sha256sum -c *.iso.sha256

lsblk -d -o NAME,SIZE,MODEL
sudo dd if=ankora-linux.iso of=/dev/sdX bs=4M status=progress conv=fsync
Careful

Check the /dev/sdX path yourself. If you pick the wrong drive, the contents of that disk are erased.